Controller to Program LRS Sensors

The EMX LRS-C1 Controller is used to program and recalibrate the sensors used in the LRS vehicle detection system. Change settings like sensitivity, presence, axis, and others to customize the sensing system for your specific needs.
When power is applied to the LRS-C1 controller and the LRS-FP or DB sensor is connected, the settings on the controller will be sent to the sensor. The sensor stores these settings even when disconnected from the LRS-C1. However, the controller is required to program and recalibrate
the sensor.

LRS-C1 Controller Specifications and Details:

• Housing: ABS plastic
• Dimensions: 3" x .9" x 2.75"
• Outputs: SPDT relay
• Power: 12-30 VDC and 24 VAC
• Output current rating relay: 1 A @ 24-120 VDC
• Current draw: 40 mA (max)
• Supply protection: Reverse polarity and fuse protected
• Use with the Flat Pack Sensor (part #LRS-FP-50) or Direct Burial Sensor (part #LRS-DB-50)
• Available as kits that include a controller and sensor (LRS-FP-50-K or LRS-DB-50-K)
• See documents under "Manuals" for more information