Light Operated Car Wash Sensor

The Telco SMR3215TP18J-D SpaceMaster Photoelectric Sensor has a polycarbonate housing and lens and a 4 pin M12 type plug. This light-operated sensor has a fifteen meter sensing range and is designed for use in hostile environments like car washes.

Specifications:

• Light Operated: Yes
  
• Noise Immune: Yes
  
• Reverse Polarity Protected: Yes
  
• Short Circuit Protected: Yes
  
• Current Consumption: Maximum 8mA
  
• Maximum Output Load: 100mA
  
• Maximum Residual Voltage: 2,5V
  
• Max. Operation Frequency: > 40 Hz
  
• Output Indicator: Yellow LED
  
• Hysteresis: Approximately 30%
  
• Opening Angle     +/- 7°
  
• Function: Receiver
  
• Supply Voltage: 10 - 30VDC
  
• Voltage Ripple: 15%
  
• Response Time on/off: <13 ms/< 6 ms
  
• Housing Material Sensor Housing: Polycarbonate
  
• Housing Material Lens Cover: Polycarbonate
  
• Housing: M18 x 1
  
• Control Feature: Adjustable range and test input
  
• Connection: 4 pin, M12 plug
  
• Sensing Range: 15 meters
  
• Output: PNP
  
• Output Status: Normally closed
  
• Operation Mode: Thru Beam

Environmental Data:

• Vibration: 10 - 55 Hz, 0,5mm
  
• Shock: 30g
  
• Operation Temperature: -4 to 122° Fahrenheit
  
• Storage Temperature: -40 to 176° Fahrenheit
  
• Sealing Class: IP 67
  
• Light Immunity 5°: 35,000 lux

The SpaceMaster SM 3000 Series Information:

The 3000 series consists of a self-contained transmitter SMT and an SMR receiver, which are used in thru-beam mode. The complete series is available in a wide range of housings with either cable or plug connection. The SMR is supplied with a 10-30VDC supply voltage with a 3 wire, NPN or PNP transistor output with a choice between light or dark function.

The control input in the SMT may be used for either disabling or enabling the transmitting power temporarily for test purpose, multiplexing applications, or as a gradual regulation of the transmitting power level.

Both the transmitter and receiver are protected against reverse polarity of power supplies, control input, and output signals. The output is also protected against short circuit and inductive loads.