10 Capacity Deflection Spray Nozzle - 35°

The Spraying Systems 1/4P-3510 FlatJet spray nozzle is designed to deliver a high-impact flat spray. Because the spray hits a deflector, water is evenly distributed from the center, retaining high impact at a narrow angle. Plus, its large flow passage helps avoid any obstructions!

Use this flat spray nozzle in presoaks, rinse arches, or any other application where adjacent spray patterns do not overlap.

• Inlet: 1/4" MNPT
• Spray Angle: 35°
• Spray Pattern Type: Even
• Capacity @ 40 PSI: 1
• Nozzle Type: P
• Capacity Size: 10
• Material: Brass
• Length: 1 7/16"
• Orifice: .078"
• Deflection Angle: 36°
• Hex Square: .625"
• Minimum Pressure: 15 PSI
• Maximum Pressure: 150 PSI