Dark Blue Composite Chemical Injector with PC1 Inlet

This quick-connect single hose barb is used to dilute one chemical with water. It is color-coded based on the water flow needed for each application. It goes with color-coded metering tips to proportion the precise chemical mix ratio.

The nozzle and body are manufactured using a corrosion-resistant composite material. The exclusive XFC o-ring increases chemical resistance to reduce o-ring swelling.

Please note: this product is designed for exclusive use with Aqua-Lab chemical dispensing systems. PC1 injectors are for use with Aqua-Lab SD GEN2 systems. This PC1 injector is for use with SAM valves only.

Details:

• Connection type: PC1 quick connect, all composite
• Flow rate: 2.25 GPM 
• Flow orifice: 0.086"
• Maximum pressure: up to 250 PSI (17 bar)
• Temperature range: 40 - 140° F
• Single hose barb
• Maximum  wrench torque: 30 in-lbs (hand tighten only)

Construction:

• Barb fitting
• XFC o-ring
• Teflon check ball
• Hastelloy spring
• Composite nozzle and body