Skip to Main Content

Banner BPS1225 Series Photoelectric Sensor, 18mm

Brand:
Mfr. Model #:
S18AW3RQ1 (33688)
KR Part #:
BPS1225
Weight:
0.13 lbs
Availability:
1
Low Stock Warning
MSRP
$121.60
Now Only!
$86.86
Solid-state LED beam car wash sensor with epoxy-wrapped thermoplastic housing. 18mm diameter barrel, 20-250AC voltage, micro 4-pin quick disconnect connector, 20 meter sensing range.
UL Listed

UL Listed

Technical Specifications

Max Temperature: 158 degrees F
Min Temperature: -40 degrees F
Voltage AC: 20-250
Certifications: UL,CCC,CSA,CE

Product Description

Epoxy Encapsulated Barrel Solid-State Sensor

The Banner BPS1225 Sensor is a solid-state photoelectric sensor that provides reliable vehicle detection in car washes without requiring physical contact. This barrel-mounted sensor is 18 millimeters in diameter and covered in a protective layer of epoxy material. It uses an LED light sensing beam to detect movement as far as 20 meters.

Specifications:

  • Input/Output: Solid-state AC switch
  • Sensing Mode (General): Opposed
  • Sensing Mode (Detailed): Receiver
  • Sensing Beam: Infrared LED
  • Housing Style: Barrel
  • Barrel Diameter: 18mm
  • Primary Housing Material: Thermoplastic
  • Max Sensing Distance: 20 meters
  • Power Supply/Supply Voltage: 20-250 Volt AC
  • Number of Pins: 4
  • Connection: Integral QD
  • Quick Disconnect Type: 1/2" (Micro)
  • Operation: Light Operated
  • Minimum Operating Temperature: -40° Fahrenheit
  • Maximum Operating Temperature: 158° Fahrenheit
  • Output Response Time: 16ms ON/8ms OFF
  • Delay at Power-Up: 100ms
  • Repeatability: 2000µs
  • NEMA Rating: NEMA 6P
  • IP RAting: IP67, IP69
  • Maximum Operating Relative Humidity: 90 @ 122° Fahrenheit
  • Lens Material: Polycarbonate

Features:

  • Washdown Rated
  • Encapsulated with epoxy
  • Ecolab Certified

Application Ideas:

  • Exit Verification (In-Bay Automatic/Rollover): Verifies that vehicle has exited car wash. Signals dryers to turn off. Prompts entry doors to open and admit next vehicle.
  • Teller/Coin Box and Menu Selection (In-Bay Automatic/Rollover): "Wakes up" teller. Doors open when correct code is entered, and previous vehicle has exited bay. Verifies that vehicle has departed coin box area.
  • Undercarriage Wash Trigger (In-Bay Automatic/Rollover and Conveyor Tunnel): Detects presence of a vehicle while it is in the undercarriage wash zone. Signals the pumps to start/stop undercarriage wash.
  • Anti-Collision (Conveyor Tunnel): Verifies that prior vehicle has exited car wash. Allows conveyor to "eject" car from system to exit the wash.
Updating...
Loading...