Inductive Detector

This vehicle loop detector senses metallic objects which enter the field around the induction loop. Features the ability to adjust between 12 VDC up to 240 VAC. ULTRAMETER digital sensitivity display informs the user regarding the optimum sensitivity setting to detect a vehicle near the loop. DETECT-ON-STOP (DOS) only detects vehicles once they have come to a complete stop over the induction loop.

Specifications:

•  Power: 12-60 VDC or 12-240 VAC (48-62 Hz)
• Operating Current (Standby/Detect): 25 mA/50 mA
• Loop Frequency: 4 settings (low, med-low, med-hi, high)
• Loop Inductance: 20-2000 µH (Q factor _ 5)
• Surge Protection: Loop circuitry protected by surge suppressors
• Presence Relay: SPDT relay contacts (form C)
• Output B Relay: SPDT relay contact (form C)
• Contact Rating (Resistive Load): 2 A @ 30 VDC, 0.5 A @ 125 VAC
• Operating Temperature: -40 to 82 C (-40 to 180F) 0 to 95% relative humidity
• Environmental Rating: IP30
• Connector: 11 pin male connector (JEDEC B11-88) compatible with DIN rail mount socket or wire harness
• Dimensions (L x W x H): 73 mm (2.9") x 38 mm (1.2") x 78 mm (3.1")

Features:

• Detects metallic objects entering the field around an induction loop
• Automatically adjusts from 12 VDC Up To 240 VAC
• ULTRAMETERª display makes set-up easy by displaying the optimum sensitivity setting required to detect a vehicle positioned near the loop
• Automatic sensitivity boost (asb), delay, fail-safe/fail-secure and infinite or normal (5 minute) presence
• Ten sensitivity settings allow for fine adjustment of the detection level
• Four frequency settings provide flexibility in preventing crosstalk in multi-loop applications
• Second output can be used for loop fault or pulse on entry/pulse on exit, or the EMX exclusive feature, Detect-on-Stop (DOS¨)