3/8" Brass Diaphragm Operation Solenoid Valve - 24VAC

The Dema 443PJ.3 Diaphragm Solenoid Valve is a brass body valve with 3/8" pipe connections and normally closed operation. It can be mounted horizontally, vertically, or on its side. This solenoid valve is intended for use with water, air, light oil, and other non-corrosive fluids.

Operation Instructions:

• When the coil on this Dema diaphragm type solenoid is energized, the plunger is pulled up. This opens the small "pilot port" in the center of the diaphragm plate. This releases the pressure on top of the diaphragm allowing incoming pressure to lift it off the larger center port.  When the coil is de-energized the solenoid plunger is pushed down by the kick-off spring and closes the pilot port.  Fluid passes through the small diaphragm bleed hole until pressure is equalized on both sides of the diaphragm to shut off the larger port.

Specifications:

• Brass body material
  
• 3/8" N.P.T. pipe size
  
• Cv flow factor: 1
  
• Maximum Operating Pressure differential:  125 PSI
  
• Safe Working Pressure: 150 PSI
  
• Normally closed
  
• Maximum Temperature: 180 degrees Fahrenheit
  
• Maximum Ambient Temperature: 120 degrees Fahrenheit
  
• Coil Voltage: 24 volt AC
  
• Power: 10 watts
• Weight: 1.6 lbs.

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).